Back to Power Supply List
Phone: (520) 749-8471 FAX: (520) 760-7780 Cell: (520) 232-4479 |
 Acopian DB5-50 Dual 5 VDC at .500 A Linear RegulatedThis Acopian DB5-50 is a Linear Regulated Dual Tracking Power Module with ±5 Vdc outputs at 0.500 Amp. Regulation is 0.1% Load, 0.05% Line, Ripple is 1.5 mV RMS. Small in size, just 2.5" X 3.5" X 2.4". Terminal strip input/output connecitons eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability. Very good condition.
Acopian 5WB600 Miniaturized 5 VDC @ 6.0 Amp Switcher
Model 5WB600 is high-efficiency and may be operated through a wide temperature range. A common-mode input filter reduces conducted noise, and the shielded case minimizes radiated energy. The output may be used in either polarity, and may be precisely trimmed. Overload/Short Circuit Protection is provided - power foldback with automatic recovery.
click on image to enlarge
Specifications:
Input Voltage: 85-130 VAC, 47-420 Hz, single phase, or 120-180 Vdc. DC input may be connected without regard to polarity.
Output Voltage:5 VDC ±2%
Output Current: 6.00 A @ 50° C; 3.60 A @ 71° C
Ripple mV (@ 25 MHz BW): 10 mV rms, 50 mV p-p
Dimensions: 1.6 x 2.5 x 3.5 (inches)
Polarity: Output is floating. Either + or - terminal may be grounded.
Line/Load Regulation: ±0.05%
Isolation: Input to Output/Input to Ground: 1400 Vdc; Output to Ground: 400 Vdc
Efficiency: 76% (Typical)
Switching Frequency: 225 kHz (Typical)
Used. 30-day warranty. New ones cost approximately $180 - you can buy this one for a fraction of that price!
 Acopian DB15-15 ±15 VDC @ 0.150 A Linear Regulated
Acopian model DB15-15 Miniaturized AC to DC Power Module, with screw terminals. Fully encapsulated, with the output factory preset to within ±1%. Input can be 105-125 VAC, 47 to 420 Hz, single phase. Output is ±15 VDC ±1% @ 0.150 A. The T/C terminal is the output common. Small in size, just 2.5" X 3.5" X 1.4". Terminal strip input/output connecitons eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability. Very good condition.
 Acopian 5EB50 5 VDC @ .5 A Linear Regulated
Acopian model 5EB50 Miniaturized AC to DC Power Module, with screw terminals. Fully encapsulated, with the output factory preset to within ±2%. Input can be 105-125 VAC, 47 to 420 Hz, single phase. Output is 5 VDC ±2% @ 0.5 A. The T/C terminal can be used to trim the output more precisely to the nominal voltage rating by connecting an external resistor from the T/C terminal to either the + or - Terminal. Small in size, just 2.5" X 3.5" X 1.6". Terminal strip input/output connecitons eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability. Like-new condition.
 Acopian 5EB100 5 VDC @ 1.0 A Linear Regulated Module
Acopian model 5EB100 Miniaturized AC to DC Power Module, with screw terminals. Fully encapsulated, with the output factory preset to within ±2%. Input can be 105-125 VAC, 47 to 420 Hz, single phase. Output is 5 VDC ±1% @ 1.0 A. The T/C terminal is the Trim terminal, which can be used to trim the output more precisely to the nominal voltage rating by connecting an external resistor from the T/C terminal to either the + or - terminal. Either positive or negative terminal may be grounded. Small in size, just 1.6" X 3.5" X 2.5". Terminal strip input/output connecitons eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability. Good condition.
Acopian 7EB115 7 VDC @ 1.15 A Linear, Regulated Module
Acopian model 7EB115 Miniaturized AC to DC Power Module, with screw terminals. Fully encapsulated, with the output factory preset to within ±2%. Input can be 105-125 VAC, 47 to 420 Hz, single phase. Output is 7 VDC ±2% @ 1.15 A. The T/C terminal is the output common. Small in size, just 2.5" X 3.5" X 1.6". Terminal strip input/output connecitons eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability. Like-new condition.
Small in size, just 2.4" X 3.5" X 2.5". Terminal strip input/output connecitons eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability. Good condition.
Acopian 14EB100 14 VDC @ 1 A Linear Regulated Module
click on image to enlarge
Acopian model 14EB100 Miniaturized AC to DC Power Module, with screw terminals. Fully encapsulated, with the output factory preset to within ±1%. Input can be 105-125 VAC, 47 to 420 Hz, single phase. Output is 14 VDC ±1% @ 1.0 A. The T/C terminal is the Trim terminal, which can be used to trim the output more precisely to the nominal voltage rating by connecting an external resistor from the T/C terminal to either the + or - terminal. Either positive or negative terminal may be grounded. Load Regulation is ±0.15%; Ripple is 1 mV RMS.
Small in size, just 2.5" X 3.5" X 2.4". Terminal strip input/output connecitons eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability. Used-Good condition.
 Acopian 15EB40 15 VDC @ .400 A Linear Regulated Module
Acopian model 15EB40 Miniaturized AC to DC Power Module, with screw terminals. Fully encapsulated, with the output factory preset to within ±1%. Input can be 105-125 VAC, 47 to 420 Hz, single phase. Output is 15 VDC ±1% @ .400 A. The T/C terminal is the Trim terminal, which can be used to trim the output more precisely to the nominal voltage rating by connecting an external resistor from the T/C terminal to either the + or - terminal. Either positive or negative terminal may be grounded. Load Regulation is ±0.1%; Ripple is 1 mV RMS.
Small in size, just 2.5" X 3.5" X 1.4". Terminal strip input/output connecitons eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability. Used-Good condition.
 Acopian 15EB100 15 VDC @ 1 A Linear Regulated Module
Acopian model 15EB100 Miniaturized AC to DC Power Module, with screw terminals. Fully encapsulated, with the output factory preset to within ±1%. Input can be 105-125 VAC, 47 to 420 Hz, single phase. Output is 15 VDC ±1% @ 1.0 A. The T/C terminal is the Trim terminal, which can be used to trim the output more precisely to the nominal voltage rating by connecting an external resistor from the T/C terminal to either the + or - terminal. Either positive or negative terminal may be grounded. Load Regulation is ±0.15%; Ripple is 1 mV RMS.
Small in size, just 2.5" X 3.5" X 2.4". Terminal strip input/output connecitons eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability. Used-Good condition.
Acopian 20EB70 Miniaturized 20 VDC @ 700 mA
click on image to enlarge
Acopian model 20EB70 Miniaturized AC to DC Power Module, with screw terminals. Fully encapsulated, with the output factory preset to within ±1%. Input can be 105-125 VAC, 47 to 420 Hz, single phase. Output is 20 VDC @ .700 A. The T/C terminal is the Trim terminal, which can be used to trim the output more precisely to the nominal voltage rating by connecting an external resistor from the T/C terminal to either the + or - terminal. Either positive or negative terminal may be grounded. Small in size, just 2.4" X 3.5" X 2.5". Terminal strip input/output connecitons eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability. Used-Good condition
Acopian 28EB50 28VDC @ 0.5A Linear Regulated Module
Acopian model 28EB50 Miniaturized AC to DC Power Module, with screw terminals. Fully encapsulated, with the output factory preset to within ±2%. Input can be 105-125 VAC, 47 to 420 Hz, single phase. Output is 28 VDC ±1% @ 0.5 A. The T/C terminal is the Trim terminal, which can be used to trim the output more precisely to the nominal voltage rating by connecting an external resistor from the T/C terminal to either the + or - terminal. Either positive or negative terminal may be grounded. Small in size, just 2.5" X 3.5" X 2.4". Terminal strip input/output connecitons eliminate all need for sockets or soldering. Short circuit protection, encapsulated construction, and conservative design assure long term reliability. Good condition.
|