Back to Power Supply List

click on image to enlarge

Model 3V51515T9 is a Linear regulated, triple isolated output power supply providing the features and characteristics of three separate supplies in one compact, easy-to-use package, measuring 3.4" x 5.1" x 10.0".Input voltage is 105 - 125 VAC, 50 - 400 Hz, single phase.  Output voltages are 5 VDC @ 6.0 Amps, and two 15 VDC outputs @ 1.0 Amps each.  All outputs are regulated ±0.15% and maximum ripple is 1 mV RMS.

This is still a production unit, that cost $295 new; you can buy this used one at a fraction of that!

stk#2548725418

click on image to enlarge

Model B5G170 is a single 5 VDC output, linear regulated general purpose power supply, ideal for powering digital circuitry, test sets, instrument bridges, and process control transmitters.

SPECIFICATIONS

Input Voltage: 105-125 VAC, 50-400 Hz, single phase

Output Voltage: 5 VDC - adjustable ±0.5 V

Output Current: 1.7 A @ 40°C, 1.3A @ 71°C

Regulation: ±0.2% Load, ±0.1% Line

Ripple: 1.5 mV RMS

Temperature Coefficient: 0.02%/°C

Ambient Operating Temperature: 0 to +71°C

Dimensions: 3.7" L x 5.1" W x 3.4" H

Shipping Weight: 5 lb.

Remote Voltage Sensing Included:
      for sensing the output voltage
      across the load, so that drops in the load lines are compensated.
      The output is floating; either positive or negative terminal may
      be grounded or floated up to 300 volts above ground.

This is still a production unit, that cost $125 new; you can buy this used one at a fraction of that!

45.00    Warranty

Acopian TD15-40 Gold Box Dual Tracking ±15 VDC Linear

Acopian model TD15-40 is a dual tracking, linear, regulated .4 A,  AC-DC power supply.  It is a convenient source of the tracking voltages required for powering operational amplifiers and related circuits.  Its positive/common/negative output terminal configuration minimizes system wiring.  Provision for remote sensing permits compensation of load line effects.  Screw Connections are made thru a convenient terminal strip with a protective barrier.

      0.400 A @ 40°C

      0.400 A @ 55°C

      0.400 A @ 71°C

Load/Line Regulation: ±0.1%

Ripple: 1.5 mv RMS

Polarity: Positive output, common, and negative output

Size: 3.4 X 5.1 X 5.7 Inches

This is still a production unit, that cost $150 new; you can buy this used one at a fraction of that!

$55.00    Warranty

click on image to enlarge

Acopian model VTD15-160 is a dual tracking, linear, regulated 1.6 A,  AC-DC power supply.  It is a convenient source of the tracking voltages required for powering operational amplifiers and related circuits.  Its positive/common/negative output terminal configuration minimizes system wiring.  Provision for remote sensing permits compensation of load line effects.  Also included in the features is Overvoltage Protection, consisting of a built-in overvoltage circuit that 'crowbars' both outputs if either output fails.

SPECIFICATIONS:

Input Voltage: 105-125 VAC, 50-400 Hz, single phase

Output Votages: ±15 VDC ±1 VDC - tracking within 1%

Output Current:

1.6 A @ 40° C, 1.4 A @ 55° C and 1.0 A @ 71° C

Load/Line Regulation: ±0.1%

Ripple: 1.5 mv RMS

Polarity: Positive output, common, and negative output

Dimensions: 3.4 x 5.1 x 7.2 inches

Shipping weight: 6 lbs.

$85.00    Warranty

click on image to enlarge

Acopian Model RB16GT500 is a 16 VDC Linear Regulated

Power Supply producing up to 5 amps.  It is Short-circuit proof (electronic current limiting), can be mounted on any of three surfaces and is completely serviceable.

 Includes Remote Voltage Sensing option which provides for sensing the output voltage across the load, so that drops in the load lines are compensated.  This also permits the use of an externally loacted potentiometer to adjust output voltage.

SPECIFICATIONS

Input voltage: 105-125 VAC, 50-400 Hz, single phase

Output Voltage: 16  ±0.5 VDC

Output Current: 5 Amps

Load/Line Regulation: 0.2%/0.1%

Ripple: <1.5 mV RMS

Connections are made via terminal strip screw connections.

This is still a production unit - the price of a new one is $245 - you can buy this one for a fraction of that!

$90.00    Warranty

Acopian 20 VDC Dual Isolated Output
Click on image to enlarge

Acopian general purpose Model 20GT50D-20GT50D, furnishes two completely independent outputs in less space and at less cost than two equivalent single output supplies.

Built in short circuit protection, floating outputs, and no derating required over the ambient operating range of -1° to +71° C.

Specifications:

Input: 105-125 VAC, 50-400 Hz, single phase.

Nominal Output Voltage: 20 ±1 VDC

Output Current: .500 Amps.

Load/Line Regulation: ±0.1%/0.05%

Ripple: 1 mV RMS

This is still a production unit, costing $180 new. You can buy this one for a fraction of that.

$65.00    Warranty

click on image to enlarge

Model 24GT50D-24GT50D is a Linear Regulated dual isolated power supply.  Each section outputs 24 VDC @ .500 Amp.

Features include: Short Circuit Protection that delivers current surges without damage - built-in fuse protects supply against prolonged overloads and shorts. Polarity: Outputs are floating.  Each output may be independently connected to provide any combination of positive and negative voltes.  Outputs may be floated up to 300 Volts above ground.

SPECIFICATIONS

Input: 105-125 VAC, 50-400 Hz, single phase.

Section 1 Output: 24 VDC ±1 VDC @ .500 Amp

Section 2 Output: 24 VDC ±1 VDC @ .500 Amp

Line/Load Regulation: ±0.05%

Ripple: 1 mV RMS

Size: 3.4 X 5.1 X 5.9 inches.

This is still a production unit, costing $180 new. You can buy this one for a fraction of that.

$65.00    Warranty

click on image to enlarge

Model 25GT50D-25GT50D is a Linear Regulated dual isolated power supply.  Each section outputs 25 VDC @ .500 Amp. Features include: Short Circuit Protection that delivers current surges without damage - built-in fuse protects supply against prolonged overloads and shorts.

Polarity: Outputs are floating.  Each output may be independently connected to provide any combination of positive and negative voltes.  Outputs may be floated up to 300 Volts above ground.

Specifications:

Input: 105-125 VAC, 50-400 Hz, single phase.

Section 1 Output: 25 VDC ±1 VDC @ .500 Amp

Section 2 Output: 25 VDC ±1 VDC @ .500 Amp

Line/Load Regulation: ±0.05%

Ripple: 1 mV RMS

Size: 3.4 X 5.1 X 5.9 inches.

This is still a production unit, costing $180 new. You can buy this one for a fraction of that.

$65.00    Warranty

click on image to enlarge

Acopian model B32GT100 is a General Purpose, linear regulated, fixed value power supply, that is short circuit proof (electronic current limiting).  The output is floating; either positive or negative termainal may be grounded or floated up to 300 volts above ground.  Note: the bottom right corner of the protective insulator is broken - this does not affect operation or compromise safety!

Specifications:

Output voltage: 32 VDC ±1 V

Output Current:

1.0 A @ 40° C

1.0 A @ 55° C

1.0 A @ 71° C

Line/Load Regulation: ±0.1%

Ripple: 1.0 mv RMS max.

Size: 3.4 x 5.1 x 5.1 inches

This is still a production unit; the price of a new one is $145 - you can buy this used one for a fraction of that!

 Back to Power Supply List