This Lambda 75 Watt DC - DC Converter was designed specifically for off-line switching 300 VDC input power requirements. It features high density - 31W/in³ - high efficiency (90%), Current Sharing Operation, N+1 Redundancy; inverter Good and Remote on/off System Interface Signals; wide range of Output adjustment of -60% to +20%.

Specifications:
Input: 200 - 400 VDC
Output: 2.00-6.00 VDC, 15.0 A @ 85°C
Regulation, Line: 0.4% or 20 mV (whichever is greater) over entire input range with constant load.
Regulation, Load: 0.8% or 40 mV (whichever is greater) from no load to full load with constant input line.
Temperature Coefficient: 0.02%/°C
Ripple and noise: 240 mV pk-pk
Remote Sensing: Sensing connections are provided to compensate for resistive drops in the output trace/leads.
Output Voltage Adjustment: The output voltage can be programmed by an external potentiometer or voltage source.
Overcurrent Protection:  105% - 140% constant current, with automatic recovery
Overvoltage Protection:  125% - 145%

Complete specifications, including mechanical and electrical details, can be found on the Lambda website:
http://www.lambdapower.com/ftp/manuals/ph75f-280_IM.pdf

New - Old Stock

This Lambda 75 Watt DC - DC Converter was designed specifically for off-line switching 300 VDC input power requirements. It features high density (31W/in³), high efficiency (90%), Current Sharing Operation, N+1 Redundancy; inverter Good and Remote on/off System Interface Signals; wide range of Output adjustment of -60% to +20%.

Specifications:
Input: 200 - 400 VDC
Output: 11.20-33.60 VDC, 2.7 A @ 85°C
Regulation, Line: 0.4% or 20 mV (whichever is greater) over entire input range with constant load.
Regulation, Load: 0.8% or 40 mV (whichever is greater) from no load to full load with constant input line.
Temperature Coefficient: 0.02%/°C
Ripple and noise: 240 mV pk-pk
Remote Sensing: Sensing connections are provided to compensate for resistive drops in the output trace/leads.
Output Voltage Adjustment: The output voltage can be programmed by an external potentiometer or voltage source.
Overcurrent Protection:  105% - 140% constant current, with automatic recovery
Overvoltage Protection:  125% - 145%

Complete specifications, including mechanical and electrical details, can be found on the Lambda website:
http://www.lambdapower.com/ftp/manuals/ph75f-280_IM.pdf

This Lambda 300 Watt DC - DC Converter was designed specifically for off-line switching 300 VDC input power requirements. It features high density (31W/in³), high efficiency (90%), Current Sharing Operation, N+1 Redundancy; inverter Good and Remote on/off System Interface Signals; wide range of Output adjustment of -60% to +20%.

Specifications:
Input: 200 - 400 VDC
Output: 9.60-28.8 VDC, 12.6 A @ 85°C
Regulation, Line: 0.4% or 20 mV (whichever is greater) over entire input range with constant load.
Regulation, Load: 0.8% or 40 mV (whichever is greater) from no load to full load with constant input line.
Temperature Coefficient: 0.02%/°C
Ripple and noise: 240 mV pk-pk
Remote Sensing: Sensing connections are provided to compensate for resistive drops in the output trace/leads.
Output Voltage Adjustment: The output voltage can be programmed by an external potentiometer or voltage source.
Overcurrent Protection:  105% - 140% constant current, with automatic recovery
Overvoltage Protection:  125% - 145%

5 Available $4 Shipping $175.00 ea. Warranty***

stk#7616052331

The Lambda PM10-24S12 is a dc-dc converter which provides a regulated output at levels up to 10 watts. It accepts a wide range of 18-36 VDC and provides a fully isolated, regulated 12 VDC output. In operation, either (or neither) input pin, as well as either (or neither) output pin can be grounded. This device uses 100% SMT technology, eliminating point-to-point wiring.

New - old stock.  Full specs can be found at:  http://www.lambdapower.com/products/pm-series.htm