Contact us at:
Phone: (520) 749-8471
FAX: (520) 760-7780
Cell: (520) 232-4479 |
|
HP 436A Power Meter w/Options 003/022The
HP 436A Power Meter is a general purpose digital power meter intended
for manual and automatic RF and microwave power measurements. It
is compatible with the entire series of HP 8480 Power Sensors.
Depending on which power sensor is used, the HP 436A can measure
power from -70 dBm (100 pW) to +44 dBm (25W) at frequencies up to 50
GHz.
This
unit has Option 022 - HP-IB (IEEE-488) programmability. This
interface allows full remote control of all power meter functions.
It also has Option 003: Reference oscillator output on rear panel
only.
Note: Manual, Sensor and Cable are NOT included.
Shipping $12
stk#7534736200
click on image to enlarge
HP 546A Logic Pulser
Automatic
polarity pulse output, pulse width, and amplitude make for easy
multi-family operation. You can code in one of its six
ROM-programmable output pulses (single pulses; pulse streams of either
1,10, 100 Hz; or bursts of 10 or 100 Hz; or burst of 10 or 100 pulses).
this feature allows you to continually pulse a circuit when
necessary, or it also provides an easy means to put an exact number of
pulses into counters and shift registers.
Shipping $5.00
Programmable 160 MHz Frequency Synthesizer with OCXO
Click on image to enlarge
|
|
|
|
|
|
Cosmetic Blemish
|
Output Level Control
|
Perfect for receiver alignment!
Programmable
Test Sources Model 160M6010 is a 0.1 to 160 MHz Frequency
Synthesizer that may be used on the bench, in manual mode or in a test
system in the programmable mode. Has very stable, accurate OCXO
with an aging rate of 1X10
-6
/year. This unit is still in production, and the cost of a new
one is $6,000+ -- you can buy this one used, for a fraction of that
price. Click here to see full specs.
Specifications
|
Frequency Range:
|
0.1-160 MHz
|
Resolution:
|
1 Hz in decades
|
| Accuracy:
|
±1x10-8/0-50°C
|
| Control:
|
Manual by 10-position dial
|
remote by TTL-level parallel entry BCD
|
Switching Time:
(to within 1 radian at new frequency)
|
100 MHz - 10 MHz digit: 20 µseconds
|
1 MHz - 0.1 MHz: 5 µseconds
|
Output Level:
|
+3 to +13 dbm (1 V max, 50 W), metered in dBm and volts (rms)
|
Output Flatness:
|
±0.5 dB
|
Control:
|
manual by front panel control; remote by analog voltage
|
5 available (all have similar minor cosmetic damage, caused by label removal)
$750.00 ea. Warranty Calibration certs available for an additional $150
stk#3820606859
Tektronix P6463A 16 Ch Pattern Gen. ProbeLIKE NEW!
TEK P6463A 16 Channel Pattern Generator Probe. This is a virtually new unit. Manual NOT included
Home | About Us | Contact Us | How to Purchase | Warranty
Last updated 2/4/10
