- AS-IS & Parts Units
- Cabinets, Chambers, Hardware, Panels
- Cables, Cords & Connectors
- Calibrated Components
- Coaxial Switches
- GPIB/IEEE-488 Products & Accessories
- Digital Meters
- General Purpose
- Manuals- Main Page
- Microwave Coaxial Devices
- Oscilloscopes
- Oscilloscope Accessories
- Power Supplies
- Probes
- Recorder & Plotter Supplies
- Specials & Promotions
- Standards, Calibrators, Testers
- TM500/5000
- Waveguide Elements
Phone: (520) 749-8471
FAX: (520) 760-7780
Cell: (520) 232-4479
TEK DC 503 Universal Counterclick on image to enlarge
The DC 503 Universal Counter offers counting to 100 MHz and provides the versatility of six measurement functions: frequency, period, ratio, time A to B, time manual, and totalize. The two channels (A and B) have individual BNC inputs and separate trigger level, attenuator, and coupling mode controls. Seven-digit LED readout with automatically positioned decimal point; leading zeros are blanked. A flashing display indicates register overflow.
$75.00 Warranty Calibration certs available for an additional $50
TEK DC5009 135 MHz Universal Counter/Timerclick on image to enlarge
Designed for use in the TEK TM5000 Series Mainframes, the Tektronix DC5009 single-width Universal Counter/Timer utilizes a powerful reciprocal frequency measurement technique to allow up to eight digits of resoluion of low frequency signals in one second or less of measurement time.
Features include:
- 135 MHz Both A and B Channels
- 10 ns Single-Shot Resolution
- 8-Digit Display
- 5 ps Resolution with Averaging
- Auto or Selected Averaging to 108 in All Modes
- Duty-Cycle Independent Autotrigger
- Shaped A and B Channel Outputs
- probe Conpensation
- Reciprocal Freauency Measurement
- Period
- Width
- Time A to B
- Events B During A
- Totalize A to B
- Ratio
- Time, Manual
- Arming
$150.00 Warranty Calibration certs available for an additional $75
TM 501 Power Module Mainframe
The Tektronix model TM 501 is a single-compartment mainframe for use with any of the single-bay TM 500 Series of plug-ins. Input power can be set to 100 V, 110 V, 120 V, 200 V, 220 V, or 240 V ±10%, via manually selectable taps on the power transformer. Power line input frequency range is 48 Hz to 440 Hz.
$75.00 Warranty
TEK TM5006 Power Module Mainframe
Tektronix TM5006 mainframe is IEEE-488 compatible. It will accept up to six instruments (plug-ins) at one time, andt was designed for the TM5000 series of plug-ins but all of the TM500 series plug-ins will also work in the TM5006. It has a high-power compartment at the right-hand end to supply higher current levels to insturments that provide higher performance or higher output levels. The mainframe has a manually selectable tap on the power transformer which permits operation on 100 V, 110 V, 120 V, 200 V 220 V or 240 V ±10%, 48 Hz to 66 Hz.<p>Note: This unit is the rack-mount version and does not include the side covers and the feet
$300.00 Warranty
Manuals
DM501A Operators/Service Manual
Manual Number 070-2749-00
$25.00
$25.00