Return to Coaxial Switches Main Page
- AS-IS & Parts Units
- Cables, Cords & Connectors
- Cabinets, Chambers, Hardware, Panels
- Calibrated Components
- Coaxial Switches
- GPIB/IEEE-488 Products & Accessories
- Digital Meters
- General Purpose
- Manuals- Main Page
- Microwave Coaxial Devices
- Power Supplies
- Probes
- Recorder & Plotter Supplies
- Specials & Promotions
- Standards, Calibrators, Testers
- TM500/5000
- Waveguide Elements
Phone: (520) 749-8471
FAX: (520) 760-7780
Cell: (520) 405-8957
| M/A-Com 7531-TMD Miniature 4-Port Transfer Switch - SMA |
| Narda 130-A0-E1D-1C1 Transfer Switch with TNC(f) Connectors |
DBP TF6A31 DC-18 GHz Transfer SwitchSMA connectors. Frequency range 0-18 GHz, Break Before Make switching.
Actuating Voltage: 24 VDC
RF Impedance: 50 Ohms nominal
Switching Time: 15 mSec max.
| Frequency | VSWR (max.) |
Insertion Loss (dB max.) |
Isolation (dB min.) |
| DC-4 GHz | 1.20 | 0.20 | 80 |
4-8 GHz
|
1.30 | 0.25 | 75 |
| 8-12 GHz | 1.35 | 0.30 | 70 |
| 12-18 GHz | 1.40 | 0.40 | 60 |
USED
| 3 available $3 Shipping $65 Warranty |
stk#ES3842545277 Return to Top |
Loral 130-A234-A1D-1C1 DC-3 GHz TTL Transfer Switch w/Indicators| Insertion Loss (dB Max): | 0.2 |
| VSWR (Max): | 1.2:1 |
| Isolation (dB Min): | 80 |
USED
| 1 available $3 Shipping $55 Warranty |
stk#380153634842 Return to Top |
M/A-Com 7531-TMD Miniature 4-Port Transfer Switch - SMA
M/A-COM 7531-TMD (Omni-Spectra 2071-6001-31) is a DPDT Transfer Switch with a frequency range of DC-18.0 GHz. Construction is Aluminum Body/Housing, finished with a Chormate Conversion Coating.
Accurately positioned rigid contacts provide consistent repeatability and a uniform impedance match over the complete frequency range. RF connectors are OSM (SMA female), solder terminals for control. 50 Ohm impedance.
| FREQUENCY RANGE (GHz): | DC-4.0 | 4.0-8.0 | 8.0-12.4 | 12.4-18.0 |
| VSWR (MAX.): | 1.2:1 | 1.3:1 | 1.4:1 | 1.5:1 |
| ISOLATION (NOM., dB): | 80 | 70 | 65 | 60 |
| INSERTION LOSS (MAX., Db): | 0.2 | 0.3 | 0.4 | 0.5 |
| CW POWER (MAX., WATTS): | 60 | 50 | 35 | 25 |
| SWITCHING TIME: | 0.02 Sec. Max. | |||
| SWITCHING ACTION: | Break-Before-Make | |||
| ACTUATION: | 28 Vdc FAILSAFE - 220 OHMS (±10% @ 20° C) | |||
| 1 available $3 Shipping $65 Warranty |
stk#310165156039 Return to Top |
Narda 132-A0-E1D-1C1 Transfer Switch - TNC(f) ConnectorsNarda model 132-AO-E1D-1C1 is a DC-3 MHz Failsafe DPDT (Transfer) Switch with female TNC connectors. RF impedance is 50 Ohms nominal, Actuating Voltage is 28 vdc, Actuating Current is 360 mA (max). Switching sequence is Break-Before-Make. Switching Time is 20 mS (max). New, Old Stock.
| VSWR: | 1.2:1 |
| Insertion Loss (Max dB): | 0.2 |
| Isolation (Min dB): | 80 |
| Actuating Voltage: | 28 VDC |
| Connectors: | TNC female |
| 1 available $3 Shipping $55 Warranty |
stk#120330844342 Return to Top |
Teledyne Elite CS37SIO Miniature Transfer SwitchThe CS-37SIO Failsafe Switch is a long-life high performance transfer switch designed for use in 50 Ohms coaxial transmission lines operating over frequencies from DC to 18 GHz. The switch is designed for minimum size compatible with SMA connector spacing.
This switch is provided with a spring operated actuator which is particularly desirable in applications where the switch is connected to one position (normally closed) most of the time and only periodically switched to the alternate position. In this type of application, holding power is required only when operating in the alternate position. Also, switching circuitry is simplified, since only one DC circuit is required.
Specifications
Actuator
|
200 mA @ 28 VDC
|
||
Switching Time
|
20 msec max.
|
||
RF Contacts
|
Break before Make
|
||
Connectors
|
SMA(f)
|
||
|
DC-6 GHz
|
6-12 GHz
|
12-18 GHz
|
VSWR (max)
|
1.25:1
|
1.40:1
|
1.50:1
|
Insertion Loss (min)
|
0.20 dB
|
0.40 dB
|
0.50 dB
|
Isolation (max)
|
70.0 dB
|
60.0 dB
|
60.0 dB
|
USED
| 2 available $3 Shipping $65 Warranty |
stk#120010953399 Return to Top |