Phone: (520) 749-8471 FAX: (520) 760-7780 Cell: (520) 232-4479 |
Transform waveguide transmission line into 50 Ohm coaxial line.
The HP NP292A Waveguide-to-Waveguide Adapter connect WR62 waveguide to WR51 waveguide with overlapping frequency ranges. Both ends are Cover flanges. VSWR is 1.05. Frequency Range is 15.0 - 18.0 GHz
Transform waveguide transmission line into 50 Ohm coaxial line.
Transform waveguide transmission line into 50 Ohm coaxial line.
Maury Microwave X230K1 8.2 to 12.4 GHz WR90 to NMD3.5mm(f) Adapter
![]()
Vertical launch 7mm (APC-7) to WR90 (cover flange)
Excellent condition - unused.
MDL 28AC39 WR28 to 2.92 mm Adapter 26.5-40 GHz
![]() Microwave Development Laboratories model 28AC39 is a 26.5 GHz to 40 GHz, WR28 Waveguide to 2.92 mm coaxial connector adapter. Cover flange.
MDL 62AC136-1F WR62 Waveguide to SMA Female Coax Adapter
![]() Microwave Development Laboratories model 62AC126-1F is a Low VSWR (1.065:1) WR62 waveguide to SMA female coaxial adapter, and covers a frequency range of 12.4 to 18.0 GHz. The SMA connector is gold plated and the body of the adapter is Brass, Silver-plated and painted blue. This adapter can be pressurized. It has a square Cover flange.
MDL 62AC136-1F WR62 Waveguide to SMA Male Coax Adapter
![]() Microwave Development Laboratories model 62AC136-1F is a Low VSWR (1.065:1) WR62 waveguide to SMA male coaxial adapter, and covers a frequency range of 12.4 to 18.0 GHz. The SMA connector is gold plated and the body of the adapter is Brass, Silver-plated and painted blue. This adapter can be pressurized. It has a square Cover flange.
MDL 90AC46-1F WR90 to Type N Adapter
![]() Microwave Development Laboratories model 90AC46-1F is a standard WR90 waveguide to Type N coaxial adapter, and covers a frequency range of 8.20 to 12.4 GHz. The Type N connector is stainless steel and the body of the adapter is Copper alloy, Silver-plated and painted blue. It has a Cover flange.
Omni-Spectra 2000-6255-00 WR62 Waveguide to SMA Adapter
Omni-Spectra 2000-6255-00 WR62 Waveguide to OSM Miniature Jack (SMA Female) Coax Adapter. Frequency Range is 12.4 to 18.0 GHz. Cover Flange, body made of light weight aluminum
![]()
Microwave Associates MA-660A Flange Adapter
UG-40/40; 0.812" thick. For X-Band, 8.2 to 12.4 GHz. Like New Condition. Has choke flange each side.
Narda 729 Variable Waveguide Attenuator
![]()
Narda Model 729, P-Band; WR62 (RG91/U) waveguide.
This variable attenuator is of the parallel vane type and provides a smooth, low backlash drive that provides continuously variable attenuation from insertion loss zero to over 20 dB.
Frequency range is 12.4 to 18.0 GHz.
Frequency range is 8.2 to 12.4 GHz.
Average Power is 2 Watts
VSWR: 1.15:1
Narda 730 Variable Waveguide Attenuator
![]()
Narda Model 730, X-Band; WR90 (RG-52/U) waveguide.
This variable attenuator is of the parallel vane type and provides a smooth continuously variable attenuation from insertion loss zero to over 20 dB. It is driven by a duo-dial for easier resetting and positive locking.
Frequency range is 8.2 to 12.4 GHz.
Average Power is 2 Watts
VSWR: 1.15:1
Used - excellent, like-new, condition.
PRD U-101 12.4 to 18.0 GHz, 0 to 60 dB Broadband Attenuator
![]()
PRD U-101 12.4 to 18.0 GHz, 0 to 60 dB Broadband Attenuator. WR-62 Cover Flanges. Excellent condition.
Sivers PM 7101P 12.4-18.0 GHz WR62 Rotary Vane Precision Attenuator
![]() Sivers model 7101P is a rotary vane, direct reading scale, 0-60 dB precision attenuator. Scale has 0.05 dB graduations from 0-1 dB, 0.1 dB graduations from 1-10 dB, 0.2 dB graduations from 10-20 dB, 0.5 dB graduations from 20-30 dB, 1 dB graduations from 30-50 dB and 2 dB graduations from 50-60 dB. WR62 cover flanges.
HP P752D 30 dB Waveguide Directional Coupler
![]()
20 dB Nominal Coupling. The HP P752D covers a range of 12.4 to 18.0 GHz, and provides a minimum directivity of 40 dB. WR62 waveguide.
The HP P752D is an essential part of many waveguide measurement systems. Attenuation measurements, reflectometer set-ups, power measurements, source leveling and network analysis are just a few areas in which these couplers are used. Performance characteristics are unaffected by humidity, temperature, and time, making this unit especially useful in microwave "standards" measurements.
MDL 62CT26-1E 12.4 to 18.0 GHz 6 dB Broadwall Coupler
![]()
MDL 62CT26-1E is a 6 dB ±0.5 dB, 12.4 to 18.0 GHz Broadwall Coupler, 6.5 inches long with WR62 cover flanges, and an aluminum body.
MDL 62CT36-1F 12.4 to 18.0 GHz 10 dB Broadwall Coupler
![]()
MDL 62CT36-1F is a 10 dB ±0.5 dB, 12.4 to 18.0 GHz Broadwall Coupler, 6.0 inches long with WR62 cover flanges, and an copper alloy body.
MDL 90XT326-R-4E 3-Port 20 dB 8.2-12.4 Crossguide Coupler
![]() MDL 90XT326-R-4E Crossguide Coupler exhibits high power handling characteristics and is excellent for flat coupling over a bandwidth of 8.2 to 12.4 GHz. When calibrated, this coupler can also perform efficiently as a secondary standard for attenuating by a known factor. This coupler has "right" direction of coupling. Input and Coupled Port have Choke flanges, Output Port has Cover Flange
MDL 90XT336-R-4E 3-Port 30 dB 8.2-12.4 Crossguide Coupler
![]() MDL 90XT336-R-4E Crossguide Coupler exhibits high power handling characteristics and is excellent for flat coupling over a bandwidth of 8.2 to 12.4 GHz. When calibrated, this coupler can also perform efficiently as a secondary standard for attenuating by a known factor. This coupler has "right" direction of coupling. Input and Coupled Port have Choke flanges, Output Port has Cover Flange
MDL 90XT336-R-7E 3-Port 30 dB 8.2-12.4 Crossguide Coupler
![]() MDL 90XT336-R-7E Crossguide Coupler exhibits high power handling characteristics and is excellent for flat coupling over a bandwidth of 8.2 to 12.4 GHz. When calibrated, this coupler can also perform efficiently as a secondary standard for attenuating by a known factor. This coupler has "right" direction of coupling. Output and Coupled Port have Choke flanges, Input Port has Cover Flange
MDL 90XT356-R-4E 3-Port 50 dB 8.2-12.4 Crossguide Coupler
![]() MDL 90XT356-R-4E Crossguide Coupler exhibits high power handling characteristics and is excellent for flat coupling over a bandwidth of 8.2 to 12.4 GHz. When calibrated, this coupler can also perform efficiently as a secondary standard for attenuating by a known factor. This coupler has "right" direction of coupling. Input and Coupled Port have Choke flanges, Output Port has Cover Flange
Waveline 70596 Ku Band 20 dB Broad Wall Directional Coupler
![]()
Waveline Model 70596 is a 20 dB Broad Wall Directional Coupler with WR62 Cover Flanges. Frequency range 12.4 - 18.0 GHz. Minimum Directivity 40 dB; Mainline VSWR 1.10 max.; Secondary Line VSWR 1.20 max. Removed from working test system.
HP P532A Frequency Meter
![]()
Hewlett Packard model P532A is a direct-reading frequency meter that will measure frequencies from 12.4 to 18.0 GHz. The long scale and numerous calibration marks provide high resolution (5 MHz increments) which is particularly useful when measuring frequency differences or small frequency changes. Frequency is read directly in GHz so neither interpolation nor charts are required.
The insturment comprises a special transmission section with a high-Q resonant cavity which is tuned by a choke plunger. A 1 dB or greater dip in output indicates resonance; virtually full power is transmitted off resonance. There are no spurious modes or resonances. WR137 cover flanges.
HP X532B Frequency Meter
![]()
Hewlett Packard model X532B is a direct-reading frequency meter that will measure frequencies from 8.20 to 12.4 GHz. The long scale and numerous calibration marks provide high resolution (5 MHz increments) which is particularly useful when measuring frequency differences or small frequency changes. Frequency is read directly in GHz so neither interpolation nor charts are required.
The insturment comprises a special transmission section with a high-Q resonant cavity which is tuned by a choke plunger. A 1 dB or greater dip in output indicates resonance; virtually full power is transmitted off resonance. There are no spurious modes or resonances. WR90 cover flanges.
Waveline 781 WR62 12.4 to 18.0 GHz Medium Power Load
![]() Waveline model 781 is a medium power dummy load designed so that reflections are held to a minimum. This model is ruggedly constructed and employs high temperature refractory dissipating elements which are in direct contact with the waveguide housing walls. Heat generated in the unit is therefore dissipated without the need for cooling fins. Finish is black, heat resisting enamel. WR62 Cover flange.
Maximum Average Power is 100 Watts, Maximum Peak Power is 160 kW. VSWR is 1.15:1. Overall length is 4.25 inches.
WR62 12.4 to 18.0 GHz Straight Section w/Mounting
![]()
Straight section is approx. 2-5/8 inches long. Has mounting block attached. Has choke flanges.
Arra 62-440-4-1 90° Twist WR62 4 inch
![]()
Arra KU440-4-1 is a WR62 waveguide 4 inch 90° twist. Aluminum with Choke/Cover flanges. This waveguide twist section is used to rotate the plane of polarization of electromagnetic waves in a transmission line, by 90°.
WR62 3½ Inch 90° Twist
![]()
WR62 waveguide 3½ inch 90° twist. Aluminum with Choke/Choke flanges. This waveguide twist section is used to rotate the plane of polarization of electromagnetic waves in a transmission line, by 90°.
WR62 4 Inch 90° Twist
![]()
4 inch 90° twist. Bronze with Choke/Cover flanges. This waveguide twist section is used to rotate the plane of polarization of electromagnetic waves in a transmission line, by 90°.
Waveline 741-2 WR62 3 inch straight section 12.4-18 GHz
![]()
Straight section is 3 inches long with choke flanges.
Waveline 742 WR62 6 inch straight section 12.4-18 GHz
![]()
Straight section is 6 inches long with choke flanges.
|